Τ Press stop bolt into the planetary carrier until contact is obtained. 1 Stop bolt 2 Planetary carrier 7609AAX158 Υ Insert the cylindrical roller bearing into the planetary gear – for this purpose press the cylindrical roller bearing through the packaging sleeve until the snap ring engages into the annular groove of the planetary gear. ц Use packaging sleeve to facilitate assembly. 1 Cylindrical roller bearing 2 Packaging sleeve 3 Snap ring 4 Planetary gear 7609AAX159 Heat bearing inner rings and insert the premounted planetary gears with large radius facing the planetary carrier (downwards) until contact is obtained. ц Adjust bearing inner rings after cooling down.
Then fix planetary gears by means of retaining rings. 7609AAX160 Heat tapered roller bearing and install it to the planetary carrier until contact is obtained. 7609AAX161 3-246 1 2 3 4