3-80 Item Description Service action Transmission noise check Engine running. Run engine at approximately 1600 rpm. 1234 Drive unit with transmission in each forward and reverse speed. LISTEN : Transmission must not make excessive noise in any range. Engine rpm must not "lug down" as unit is shifted between gears. OK Check completed. NOT OK Go to transmission makes excessive noise, chapter 2 in this group. Transmission "quick shift" check Engine running. Release parking brake and select Release T/M shift mode to MANUAL mode. P Shift to 2nd forward. Drive machine at approximately 5km/h and press gear selector lever MANUAL mode kick down switch or RCV levers switch once. LOOK/FEEL :
Transmission must shift to and remain in 1st gear. Press gear selector lever kick down switch once. LOOK/FEEL : Transmission must shift back to 2nd gear. 1234 Shift to (3rd or 4th) gear and press gear selector lever kick down switch once. LOOK/FEEL : Transmission must not shift down. AL mode Select T/M shift mode to AL (auto light) mode. Drive machine at approximately 90 speed of max speed in each gear (2nd or 3rd or 4th). Shift to (2nd or 3rd or 4th) gear in each forward and reverse speed and press gear selector kick down lever switch or RCV lever switch once. LOOK/FEEL :
If shift down quickly from current gear to one step lower speed and recover to original speed quickly when push the switch one more time. (mode 1) If shifts down from current gear to one step lower speed when push the switch everytime and recover when push the switch in 1st gear. (mode 2) OK Check completed. NOT OK Check connector at base of control valve. IF OK Go to transmission controller circuit in group 1.