Kaiyi — Kaiyi Power Train System Technical Manual

3-81 Item Description Service action Forward, reverse and 4th speed clutch pack drag check ö Transmission must be warmed up for this check. Engine running. Park unit on level surface. Apply service brakes. 1234 Move gear selector lever to neutral. Release Move gear selector lever to 1st. P Release parking brake and service brakes. Run engine at low idle. LOOK : Unit must not move in either direction. NOTE : If unit moves forward, either the forward pack or the 4th speed pack is dragging. OK Check completed. NOT OK If unit moves, repair transmission. Transmission shift modulation check Engine running. Run engine at approximately 1300 rpm.

Put transmission in 1st forward, 1234 shift several times from forward to reverse and reverse to forward. Repeat check in 2nd gear. LOOK : Unit must slow down and change direction smoothly. OK Check completed. NOT OK Go to unit shifts too fast, chapter 2 in this group. Torque converter check Start engine. Apply service brakes and release parking brake. Move gear selector lever to 3rd 1234 speed. Move gear selector control lever to forward "F" position. Increase engine speed to high idle. LOOK : Torque converter stall rpm must be within the following range. Stall rpm : 2000Ü70 rpm Move gear selector control lever to neutral "N" position and run for 15 seconds. OK Check completed.

NOT OK If stall rpm are too low or too high, problem may be engine power or torque converter. IF OK Replace transmission torque converter.