Komatsu — 24.6 EVERY 500 HOURS SERVICE

24. SERVICE PROCEDURE 24.6 EVERY 500 HOURS SERVICE Maintenance for every 50 and 250 hours should be car- ried out at the same time. 24.6.1 REPLACE FUEL FILTER CARTRIDGE A WARNING l Engine is at high temperature immediately after the machine has been operated. Wait for engine to cool down before replacing the filtei. l Do not bring fire or sparks near the fuel. Prepare a filter wrench and a container to catch the fuel. 1. Set the container to catch the fuel under the filter car- tridge. 2. Using a filter wrench, turn filter cartridge 0 counterclock- wise to remove it. 3.

Clean the filter holder, fill a new filter cartridge with clean fuel, coat the packing surface with engine oil, then install it to the filter holder. 4. When installing, tighten until the packing surface contacts the seal surface of the filter holder, then tighten it up about 2/3 of a turn. If the filter cartridge is tightened too far, the packing will be damaged and this will lead to leakage of fuel. If the fil- ter cartridge is too loose, fuel will also leak from the pack- ing, so always tighten to the correct amount. 5. After replacing filter cartridge 0, loosen air bleeding plug 0. 6.

Loosen feed pump knob 0 and move the pump up and down to draw off fuel until air ceases to come out of air bleeding plug 0. 3-50