Komatsu — 24.6 EVERY 500 HOURS SERVICE

24. SERVICE PROCEDURE 24.6.2 CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE Prepare the followings. 0 Container to catch drained oil: Min 11 II capacity Refill capacity: 11 II Socket wrench, filter wrench. l l 1. Remove the cover at the bottom of the machine and set a container to catch the oil under the drain plug. 2. Remove drain plug @ slowly to avoid getting oil on your- self, and drain the oil. 3. Check the drained oil, and if there are excessive metal particles or foreign material, please contact your Komatsu distributor. 4. Install drain plug 8. 5. Using a filter wrench, turn filter cartridge @ counterclock- wise to remove it.

When doing this, to prevent getting oil on yourself, do not carry out this operation from immedi- ately under the cartridge. In particular, if this operation is carried out immediately after stopping the engine, a large amount of oil will come out, so wait for 10 minutes before starting the operation. 6. Clean the filter holder, coat the packing surface of a new filter cartridge with engine oil (or coat it thinly with grease), then install it to the filter holder. 7. When installing, tighten until the packing surface contacts the seal surface of the filter holder, then tighten it up fur- ther l/2 of a turn. 3-52