Komatsu — 24.7 EVERY 1000 HOURS SERVICE

24. SERVICE PROCEDURE 24.7 EVERY 1000 HOURS SERVICE Maintenance for every 50, carried out at the same time. 250 and 500 hours should be 24.7.1 CHANGE OIL IN TRANSMISSION CASE, CLEAN STRAINER A WARNING The oil is at high temperature immediately after the ma- chine has been operated. Wait for the oil to cool down before starting the operation. l Prepare the followings. Container to catch drained oil: Min 13 Q capacity Refill capacity: 13 Q Socket wrench l l 1. Remove the cover at the bottom of the machine and set a container to catch the oil under drain plug 8. 2. Remove drain plug @ slowly to avoid getting oil on your- self, and drain the oil. After draining the oil, tighten drain plug 8. 3.

Remove mounting bolts 0 on tube 0, remove lowest mounting bolt 0 on strainer case 0 then take out tube 0. 4. Take out strainer 0. If strainer 0 is damaged, replace it with new one. 5. Remove all dirt from the strainer, then wash in clean die- sel oil or flushing oil. Clean the case interior and the removed parts. 6. After installing the strainer, refill the specified quantity of engine oil through oil filler 0. For details of the oil to use, see “20. USE OF FUEL, COOL- ANT AND LUBRICANTS ACCORDING TO AMBIENT TEM- PERATURE”. 3-55