Komatsu — 24.7 EVERY 1000 HOURS SERVICE

24. SERVICE PROCEDURE 7. Check that the oil is at the specified level. For details, see “24.3 CHECK BEFORE STARTING”. 8. Keep the steering and directional lever at the N (neutral) position, and move the lever fully in the left direction. Next, move the lever fully in the right direction. Repeat this operation 10 times and fill the steering and brake cir- cuits with oil. 9. Travel the machine at first speed and check that the ma- chine can make a left turn and a right turn certainly. 24.7.2 CHANGE OIL IN TRANSFER CASE (INCL. BEVEL GEAR CASE) before starting the operation. 0 Prepare the followings. Container to catch drained oil: Min. 17 II capacity Refill capacity: 17 Q Socket wrench 0 l 1.

Set a container to catch the oil under drain plug 8 at the bottom of the machine. - Remove drain plug (I? slowly to avoid getting oil on your- self, and drain the oil. After draining the oil, tighten drain plug @. 2. 3. Refill the specified quantity of engine oil through oil filler 0. For details of the oil to use, see “20. USE OF FUEL, COOL- ANT AND LUBRICANTS ACCORDING TO AMBIENT TEM- PERATURE”. 4. Check that the oil is at the specified level. For details, see “24.3 CHECK BEFORE STARTING”. 3-56