24. SERVICE PROCEDURE 24.7.3 CHANGE OIL IN STEERING CLUTCH CASE after the ma- oil to cool down before starting the operation. l Prepare the followings. Container to catch drained oil: Min. 30 Q capacity Refill capacity: 30 Q Socket wrench l l 1. Set a container to catch the oil under drain plug @ at the bottom of the machine. Remove drain plug 8 slowly to avoid getting oil on your- self, and drain the oil. After draining the oil, tighten drain plug @. Refill the specified quantity of engine oil through oil filler 0. For details of the oil to use, see “20. USE OF FUEL, COOL- ANT AND LUBRICANTS ACCORDING TO AMBIENT TEM- PERATURE”. Check that the oil is at the specified level.
For details, see “24.3 CHECK BEFORE STARTING”. 3-57