3. Using a clean container, dissolve the specified number of packets of anti-corrosive agent KI-2 in fresh water. (At room temperature, one packet will dissolve in approx. 3 liters of water.) 4. Pour the solution made in Step 3 into the radiator through the radiator water filler. To prevent the radiator water from overflowing when doing this, first drain enough water from the radiator to leave room for the added solution. After adding the anti- corrosive agent solution, add fresh water to the specified level. 5. If anti-corrosive agent KI-2 is added directly through the radiator water filler, run the engine for 30 - 60 minutes to make sure that the solution is thoroughly mixed.
REMARK Anti-corrosive agent KI-2 can be used together with almost any brand of antifreeze, but do not use it together with DOW- THERM 209. When using anti-corrosive agent KI-2 for the first time in the engine of a machine that is in, operation, first flush the cooling system. 3-62