Komatsu — 24.7 EVERY 1000 HOURS SERVICE

24. SERVICE PROCEDURE 24.7.7 ADD ANTI-CORROSIVE AGENT TO COOLING SYSTEM (Applicable only in hard water areas) a WARNING l Do not remove the radiator cap when the water is hot. Boiling water may spurt out. Wait for the temperature to go down, then turn the cap slowly to release the pressure before removing the cap. l The anti-corrosive agent KI-2 is a strong alkali, so be careful not to get it on your skin. If it gets on your skin, wash it off with ample water. l Do not use the empty anti-corrosive KI-2 packet for keeping food. NOTICE To restrict the formation of rust and scale in hard water areas, add Komatsu genuine anti-corrosive agent KI-2 (pow- der) to the cooling system.

Never use commercially available anti-corrosive agents made by (Fleetguard, etc.). Select the amount of anti-corrosive agent KI-2 to match the quality of cooling water. Quality of cooling water I Amount of anti-corrosive agent Class 1 1 packet Class 2 2 packets If it is unclear what the quality of the water is, please contact your Komatsu distributor. Method of adding 1. Stop the engine. 2. Slowly remove radiator water filler cap 0. 3-61