17. GUIDES TO MAINTENANCE Perform maintenance work on hard, flat ground. Komatsu genuine replacement parts: Use Komatsu genuine parts specified in the parts list as replacement parts. Komatsu genuine oils: Use Komatsu genuine oils and grease. Choose oils and grease with proper viscosities specified for ambient temperature. Clean oil and grease: Use clean oil and grease. Also, keep containers of the oil and grease clean. Keep foreign ma- terials away from oil and grease. Keeping the machine clean: Always keep the machine clean. This makes is easier to find parts causing problems. Keep in particular grease fittings, breathers and oil level gauges clean and avoid getting in them.
foreign matters from Be careful of hot water and oil: Draining hot oils and coolants and removing their filters immediately after hazardous. Allow the engine to cool. If the oil has to be drained when it is cold, warm up the oil to a suitable 20 - 40°C) before draining it. the engine stops are temperature (approx. Checking foreign materials in drained oil: After oil is changed or filters are replaced, check the oil and filters for metallic particles and foreign materials. If large quantities of metallic particles or foreign materials are found, consult your Komatsu distributor. Fuel strainer: If your machine is equipped with a fuel strainer, do not remove it while fueling. Oil change:
Check or change oils in the places where dust is scarce to keep foreign materials away from oils. Warning tag: Attach the warning tag to the starting switch or other appropriate control lever to avoid some- one who is not aware of the circumstances from starting the engine. Obey precautions: During the operation, always obey the precautions on the safety label stuck to the machine. 3-2