MAINTENANCE SECTION 5 Page 51 TRANSMISSION AND TORQUE CONVERTER 5.18.5. SERVICING THE BREATHER The breather is located on the LH side of the rear main frame close to the torque converter (Fig. 5.57). The breather vents the entire drive train, i.e. torque converter and transmission. Remove the breather, disassembly and wash the breather in a commercial cleaning solvent available. 5.19. CAB Fig. 5.58. Cab Mounting 1 - Cab 2 - Front Frame 3 - Bolts Check periodically torque of ROPS cab mounting bolts. Refer to Section 6 SPECIAL TORQUES. 5.20. LOADER EQUIPMENT BUCKET INSTALLATION AND REMOVAL Fig. 5.59. Bucket Installation 1 - Bolt 2 - Pin 3 - O-Ring 4 - Shim DRESSTA OM560C99/1E