SECTION 4 OPERATING Page 18 INSTRUMENTS AND CONTROLS WARNING! Do not switch the transmission disconnect switch when traveling fast or going downhill . Loss of control or damage to the power train could result when the pedal is released and transmission re-engages. 43. TRANSMISSION NEUTRAL LOCK LEVER The lever locks the transmission direction lever in neutral position. To release the direction lever from the neutral position, push the lock lever up. WARNING! Before leaving the machine, lock the transmission direction lever in neutral position with the lock lever. 44. TRANSMISSION GEAR RANGE LEVER This lever is used to select the gear range according to operation conditions.
Refer to SHIFTING GEARS for additional information. 45. TRANSMISSION DIRECTION LEVER This lever is used to select machine direction. Refer to SHIFTING GEARS for additional information. WARNING! Before leaving the machine, lock the transmission direction lever in neutral position with the lock lever. 46. STEERING WHEEL The wheel loader is equipped with hydraulic steering system. Movement of the steering wheel actuates the steering valve which directs oil to steering cylinders. For a right turn rotate the wheel clockwise and for the left turn, rotate the wheel counterclockwise. Steering system operates as long as steering wheel is turned .
No effort exerted on steering wheel stops turning and machine maintains preset direction. 47. STEERING WHEEL HEIGHT ADJUSTMENT KNOB Steering wheel height can be varied by loosening the knob, moving the steering wheel to the desired height and then tightening the knob. 48. AUXILIARY EQUIPMENT LEVER Not equipped in standard configuration of the machine. Located near to bucket control lever close to the operator. 49. BUCKET CONTROL LEVER The lever controls roll back and dumping operation of the bucket. Refer to BUCKET CONTROL LEVER POSITIONS for additional information. 50. BOOM CONTROL LEVER The lever controls raising and lowering operations of the boom.
Refer to BOOM CONTROL LEVER POSITIONS for additional information. 51. ACCELERATOR PEDAL Depress the pedal to increase engine speed, release the pedal to decrease engine speed. Pedal returns automatically to low idle position. 52. HORN BUTTON Depress the button to sound horn, release the button to stop. OM560C99/1E DRESSTA