Home Location Register (HLR) Release 9.1 Subscriber Provisioning Reference Manual 100 910-6701-001 Revision A, June 2013 Attribute Value Range Default Description the PDN GW FQDN upon which to perform a DNS resolution. RFSPId Unsigned int 32 Null This parameter is the RAT-Frequency-Selection-Priority-Id, which contains the subscriber’s profile Id for RAT/Frequency Priority. HlrProxy Mode Bool (0,1) 0 This flag is used by the LTE-HSS to decide where/how a subscriber should get registered when receiving a ULR message.
If the flag is set to “true” (1), the subscriber is hosted by a remote HLR and the LTE-HSS forwards the registration request to the SDM ngHLR’s HLR-Proxy functionality, which in turn forwards the message to the external HLR. Note: For the HLR-Proxy functionality to work for the subscriber, the LteHssImsiRangeConfig entity must be configured for the subscriber’s IMSI Range. You can configure this entity through the Tekelec CLI, refer to the “HLR Proxy functionality” section of the SDM System Configuration – Reference Manual for details on the LteHssImsiRangeConfig entity and the CLI Navigation and syntax. If it is set to “false” (0), the subscriber is hosted locally, by the SDM ngHLR.
In this case, the message is forwarded to the SDM ngHLR, which handles the subscriber’s registration locally. SRILCSAllowed Bool (0,1) 1 Control of SRI-LCS per subscriber. True (1): allow SRI-LCS False (0): Do not allow SRI-LCS Curr Software Version UTF8String Null Read-Only. The Tekelec ngHLR stores in its database the value received in the Software-Version AVP, as the CurrSoftwareVersion parameter. It contains the 2-digit Software Version Number (SVN) of the International Mobile Equipment Identity, as specified in 3GPP TS 23.003 [3]. Curr3GPP2 MEID OctetString Null Read-Only. The Tekelec ngHLR stores in its database the value received in the 3GPP2-MEID AVP, as the Curr3GPP2MEID parameter.