Home Location Register (HLR) Release 9.1 Subscriber Provisioning Reference Manual Operations Permitted Add, modify, delete*, display Note: Not all users (User Groups) are allowed to perform these operations. Provisioning TIP: The last BS in a BSG cannot be removed if an applicable supplementary service (CF, CW, CB) is provisioned/registered/activated with a corresponding BSG.
CLI Example Subscriptions[]> Subscription[SubscriptionID=sub-1]> Add SubscriberProfile[HlrServiceProfileID =1; PreferredRoutingNetworkDomain = Gsm; MsIsdnAlertInd = 0; TeleServiceList = TS11; BearerServiceList = BS21; OdbMask = AllOGCalls; UssdAllowed = 1; SubsRoamingMsgOn=1;SubscriberState=0; FTNRule=ftnrule1; ServiceMaskTemplateId=1; Nam = 0; MsCat =102; AtiSubsInfoLevel =4; SubsVlrMsgNotificationOn=1] Call Barring – Basic Service Group Name CallBarringOG_BSG Description To provision Call Barring Basic Service Group details for a subscriber.
CLI Navigation Subscriptions[]> Subscription [SubscriptionID]> SubscriberProfile[HlrServiceProfileID]> CallBarringSS> CallBarringOG_BSG CLI Inherited Attributes SubscriptionID, HlrServiceProfileID, BarringId CLI Command Syntax Subscriptions[]> Subscription[SubscriptionID= ]> SubscriberProfile[HlrServiceProfileID = ]:CallBarringSS[BarringId = ]>add CallBarringOG_BSG[BsgId = 1,2,6,7,8,12; ActState_A = 0,1; ActState_Q = 0,1; IndState = 0,1] 101 910-6701-001 Revision A, June 2013 Attribute Value Range Default Description This AVP contains the Mobile Equipment Identifier of the user's terminal.
For further details on the encoding of the AVP data, refer to the encoding of the Mobile Identity (MEID) octets 3 to 10 in 3GPP2 A.S0022 [28] Annex A.