Home Location Register (HLR) Release 9.1 Subscriber Provisioning Reference Manual Attributes and Values Table 38: CAMELCsiData mandatory attributes Table 39: CAMELCsiData optional attributes 116 910-6701-001 Revision A, June 2013 Attribute Value Range Default Description CsiType 1 O-CSI 2 T-CSI 3 VT-CSI 4 GPRS-CSI 5 OSMS-CSI 6 D-CSI 7 M-CSI 8 U-CSI 9 TIF-CSI 10 SS-CSI N/A This parameter allows you to specify the CSI type to be used. Important: When provisioning an entry with CsiType=O-CSI or CsiType=T-CSI, the CamelPhase parameter becomes mandatory (see description below).
Attribute Value Range Default Description ProvisionState 0,1 0 This flag can be provisioned to indicate the Provision state of a specific CAMEL Csi Data. Note: Setting this parameter to 0 (not provisioned) doesn’t delete the entry provisioned in the database, it simply means that the system won’t support this service for the subscriber. CamelPhase 1 (Phase1) 2 (Phase2) 3 (Phase3) 3 This flag can be provisioned to indicate to the Tekelec ngHLR what Camel Phase must be supported per CSI. Note: Only the T-CSI and O-CSI can be provisioned with multiple different Camel Phases. All other CSI Types can only be provisioned with one single Camel Phase.
For the T-CSI and O-CSI, the CamelPhase parameter is mandatory.