Home Location Register (HLR) Release 9.1 Subscriber Provisioning Reference Manual 117 910-6701-001 Revision A, June 2013 Attribute Value Range Default Description ActiveState 0,1 0 This flag can be provisioned to indicate the Active state of a specific Camel Csi Data. Note: Setting this parameter to 0 (not active) doesn’t delete the entry provisioned in the database, it simply means that the system won’t invoke this service for the subscriber. NotifyCse 0,1 0 This flag can be provisioned to indicate to the Tekelec ngHLR whether or not the Camel Server needs to be notified when any changes occur in the CamelCsi Data.
ActionOnUnsCamelPh 0 Standard 1 Deny 2 Odb 3 ApplyMask 4 BSG-BAOC 0 Applicable only for O-CSI. This allows the operator to determine the type of action (behavior) it wants the Tekelec ngHLR to take when handling CAMEL. For further information on these behaviors, refer to section Enhanced CAMEL handling and section CAMEL roaming enhancements in the SDM Product Description. Inhibition 0 (Always Send) 1 (Don’t send when in HPLMN) 2 (Don't send when NotReach/CF) 3 (Don't send when in HPLMN or NotReach/CF) 0 (Always Send) This flag allows the operator to choose whether or not the Tekelec ngHLR sends the subscriber’s T-CSI information in the SRI. This flag can be set to one of these options:
0 (Always Send): This means that the Tekelec ngHLR proceeds with the SRI call flow as if the subscriber has T-CSI “Provisioned”. 1(Don’t send when in HPLMN): This means that the Tekelec ngHLR verifies if the PLMN in which the subscriber is located is defined as a Home PLMN in the HPLMN entity (entity provisionable by the operator, refer to “Support for multiple CC-NDC as Home PLMN” section). If it is the case, the Tekelec ngHLR then proceeds with the SRI call flow as if the subscriber has T-CSI “NOT provisioned” - For details on the HPLMN entity, refer to the “Define HLR identities, HPLMN definitions and IMSI ranges” section