BAIC — CAMEL CSI Data

Home Location Register (HLR) Release 9.1 Subscriber Provisioning Reference Manual CLI Example Subscriptions[]> Subscription[SubscriptionID= sub-1]> SubscriberProfile[HlrServiceProfileID = 1]:CamelData[]>add CamelCsiData[CsiType=1; ProvisionState=0; ActiveState=0; CamelPhase =3; NotifyCse=1; ActionOnUnsCamelPh=0] 118 910-6701-001 Revision A, June 2013 Attribute Value Range Default Description of the SDM System Configuration – Reference Manual.). 2(Don’t send when Not Reachable/CF): This means that the Tekelec ngHLR verifies if all of the following conditions are met: -the subscriber is not reachable -Call Forward (CFNRc, CFU) is detected for this subscriber.

If at least one condition is met, the Tekelec ngHLR proceeds with the SRI call flow as if the subscriber has T-CSI “NOT provisioned”. 3(Don’t send when in HPLMN or Not Reachable/CF):This means that the Tekelec ngHLR verifies if all three of the following conditions are met: -the subscriber is not reachable -Call Forward (CFNRc, CFU) is detected for this subscriber. -the subscriber is roaming in a HPLMN (PLMN is defined as HPLMN in the Tekelec ngHLR’s HPLMN entity). For details on the HPLMN entity, refer to the “Define HLR identities, HPLMN definitions and IMSI ranges” section of the SDM System Configuration – Reference Manual).

If at least one condition is met, the Tekelec ngHLR proceeds with the SRI call flow as if the subscriber has T-CSI “NOT provisioned”.