Home Location Register (HLR) Release 9.1 Subscriber Provisioning Reference Manual 160 910-6701-001 Revision A, June 2013 Attribute Value Range Default Description Delivery order should be set to 'no' for PDP Type = 'IPv4' or 'IPv6' QosMaxBitRate Down Unsigned integer (0 to 16 000 kbits/sec) N/A Maximum number of bits delivered by UMTS and to UMTS at a SAP within a period of time, divided by the duration of the period. QosMaxBitRateUp Unsigned integer (0 to 8400 kbits/sec) N/A Maximum bitrate used to make code reservations in the uplink of the radio interface.
QosResidualBER 0 (Unknown), 1 (5E-2), 2 (1E-2), 3 (5E-3), 4 (4E-3), 5 (1E-3), 6 (1E-4), 7 (1E-5), 8 (1E-6), 9 (6E-8) 0 Indicates the undetected bit error ratio in the delivered SDUs. If no error detection is requested, Residual bit error ratio indicates the bit error ratio in the delivered SDUs. QosSDUError Ratio 0 (Unknown), 1 (1E-2), 2 (7E-3), 3 (1E-3), 4 (1E-4), 5 (1E-5), 6 (1E-6), 7 (1E-1) 0 Indicates the fraction of SDUs lost or detected as erroneous. SDU error ratio is defined only for conforming traffic.
QosTransfer Delay Unsigned integer (10 to 4 000) N/A th Indicates the maximum delay for 95 percentile of the distribution of delay for all delivered SDUs during the lifetime of a bearer service, where delay for an SDU is defined as the time from a request to transfer an SDU at one SAP to its delivery at the other SAP.