Home Location Register (HLR) Release 9.1 Subscriber Provisioning Reference Manual CLI example (version 99 is used as an example) Subscriptions[]> Subscription[SubscriptionID= sub-1]> SubscriberProfile[HlrServiceProfileID=1]>add GprsContext [PdpContextId = 1; AccessPointName = mcc.mnn.gprs; PdpType = PPP; PdpAddress = 192.168.10.100; VplmnAddressAllowed = 1; QosAllocationRetentionPrioriy= HighPriority ; QosTrafficClass = Conversational; QosDeliveryErroneousSDU = NoDetect ; QosMaxSDUSize =1000 ; QosDeliveryOrder =Yes; QosMaxBitRateDown =10000; QosMaxBitRateUp =5000; QosResidualBER =5E-2; QosSDUErrorRatio =1E-2; QosTransferDelay =1000 ; QosTrafficHandlingPriority =Level1; QosGuaranteedBitRateUp =2500; QosGuaranteedBitRateDown =8000; QosSignallingIndication =Optimized] Subscriptions[]> Subscription[SubscriptionID= sub-1]> SubscriberProfile[HlrServiceProfileID=1]>add GprsContext [PdpContextId = 1; AccessPointName = mcc.mnn.gprs; PdpType = PPP; PdpAddress = 192.168.10.100; VplmnAddressAllowed = 1; QosAllocationRetentionPrioriy= HighPriority ; QosTrafficClass = Conversational; QosDeliveryErroneousSDU = NoDetect ; QosMaxSDUSize =1000 ; QosDeliveryOrder =Yes; QosMaxBitRateDown =10000; QosMaxBitRateUp =5000; QosResidualBER =1; QosSDUErrorRatio =1; QosTransferDelay =1000 ; QosTrafficHandlingPriority =Level1; QosGuaranteedBitRateUp =2500; QosGuaranteedBitRateDown =8000; QosSignallingIndication =Optimized] 161 910-6701-001 Revision A, June 2013 Attribute Value Range Default Description QosTraffic Handling Priority 0 (Unknown), 1 (Level1), 2 (Level2), 3 (Level3) 0 Specifies the relative importance for handling of all SDUs belonging to the UMTS bearer compared to the SDUs of other bearers.
QosGuaranteed BitRateUp Unsigned integer (0 to 8400) N/A Describes the bitrate the UMTS bearer service shall guarantee to the user or application during the upload. QosGuaranteed BitRateDown Unsigned integer (0 to 16 000) N/A Describes the bitrate the UMTS bearer service shall guarantee to the user or application during the download. QosSignalling Indication 0 (NonOptimized), 1 (Optimized) 0 Indicates the signalling nature of the submitted SDUs. This attribute is additional to the other QoS attributes and does not over-ride them. This attribute is only defined for the interactive traffic class.
If signalling indication is set to 'Optimized', the UE should set the traffic handling priority to '1'.