BAIC — AssignSIM()

Home Location Register (HLR) Release 9.1 Subscriber Provisioning Reference Manual provisioned in the Sim entity, but becomes unassigned to any subscriber. If you wish to delete it, you can delete the corresponding entry from the Sim entity. If this parameter is set to ‘1’, the Tekelec ngHLR automatically deletes the data of the old SIM card provisioned in the Sim entity after the completion of the SIM swap. Deferred: bool (0 or 1) that indicates whether the Tekelec ngHLR must delay the completion of the SIM swap operation until the first Update Location of one of the new SIM card’s IMSIs is received.

If this parameter is set to ‘0’ (default value), then the Tekelec ngHLR immediately executes completely the SIM swap operation. If this parameter is set to ‘1’, then the Tekelec ngHLR waits before completing the SIM-swap operation until the first Update Location of one of the new SIM card’s IMSIs is received. In the mean time (before receiving the first UL), the SIM-swap operation will be in “pending” mode and the list of “pending” SIM-swap operations can be displayed from the WebCI, by displaying the SimSwapDeferred entity. Refer to the SDM System Configuration – User Guide.

CLI Command Syntax Hlr[]> SwapSIM() SubscriptionID={Id name}; OldSimId={Old Sim Id #}; NewSimId={New Sim Id #}; AutoMap={0,1}; DeleteOldSIM={0,1}; Deferred={0,1} CLI Example Hlr[]> SwapSIM() SubscriptionID = 1; OldSimId = 234445666000; NewSimId = 234445666001; AutoMap = 1; DeleteOldSIM = 1; Deferred = 0 This example will change the SIM 234445666000 (Old SIM ID) of the subscriber to the New SIM 234445666001 and update all the IMSI of the association table (MsIsdnImsiProfileAssociation). CancelDeferredSwap() The CancelDeferredSwap() operation can be used to cancel a SIM-swap operation that has been executed with the parameter Deferred set to ‘ 1 Note:

This operation can only be executed if the SIM-swap operation is still in a “pending” mode, which means that it still hasn’t been completely executed and the first UL from the new SIM card’s IMSI still hasn’t been received. In order to view the list of “pending” SIM swap operations (Deferred SIM swap operations that have not yet been completed), display the SimSwapDeferred entity. CLI Command Syntax Hlr[]> CancelDeferredSwap() OldSimId={Old Sim Id #}; NewSimId={New Sim Id #} AssignSIM() The AssignSIM() operation can be used to assign a SubscriptionID to an already provisioned Sim card that is unused by any subscriber and therefore unassigned to any subscriber (SubscriptionID).

CLI Command Syntax Hlr[]> AssignSIM() SubscriptionID={Id name}; SimId={Sim Id #} 213 910-6701-001 Revision A, June 2013