Home Location Register (HLR) Release 9.1 Subscriber Provisioning Reference Manual UnassignSIM() The UnassignSIM() operation can be used to unassign a SubscriptionID to an already provisioned Sim card that is already assigned to a subscriber (SubscriptionID). Once this operation is executed, the Sim card becomes unused and all its associated IMSIs and subscriber profiles become unusable. Note: All the data provisioned for this SubscriptionID and Sim card remain provisioned in the Tekelec ngHLR’s database. Note:
the IMSI of a SIM card (SimImsiMap) with a NULL value for the SubscriptionID cannot be used in the MsIsdnImsiProfileAssociation because the SubscriptionID must be the same for the HlrServiceProfileID, MSISDN and IMSI (SIM). CLI Command Syntax Hlr[]> UnassignSIM() SimId={Sim Id #} DeleteHLRSubscriber() The DeleteHLRSubscriber() operation allows the Network Operator to cleanup the entries provisioned in all the HLR entities that are linked to a subscriber (SubscriptionID). This operation deletes all the MSISDN-IMSI associations, the HlrServiceProfile and MSISDN(s) for the subscriptionID. Mandatory parameter: IMSI or SubscriptionID:
For this operation, the user can provide only SubscriptionID or IMSI. The operation fails if both parameters are provided. If the Imsi is provided, the subscriptionID is obtained by finding the SimId of the IMSI and the SubscriptionID of the SimId. Optional parameters: DeleteSIM: bool (0 or 1). If this parameter is set to ‘1’, all the SIM card data for the subscriptionID will also be deleted, if it is set to ‘0’ or not provided (default 0), all the SIM of the subscriptionID will be unassigned (set NULL for subscriptionID). DeleteSubscriptionID: bool (0 or 1).
If this parameter is set to ‘1’, the Tekelec ngHLR will perform a cleanup of the data provisioned for the subscriber (SubscriptionID) and at the end tries to delete the subscriptionID. If the SubscriptionID is used by other applications (HSS, SLF, SIP, AAA, ENUM), the Tekelec ngHLR won’t delete it, but the operation will remain successful. Moreover, if one of the MSISDN for the subscriptionID is used by MNP and the DeleteHLRSubscriber is performed, the MSISDN and the SubscriptionID will not be deleted and the operation will still pass (no error returned). Also, if one/many of the MSISDN-IMSI associations deleted have an IMSI registered, a Cancel Location is sent.
CLI Command Syntax Hlr[]> DeleteHLRSubscriber() SubscriptionID={Subscription Id #}; DeleteSIM={0 or 1}; DeleteSubscriptionID={0 or 1} ModifyDisplayedMSISDN() The ModifyDisplayedMSISDN() operation allows the Network Operator to change the displayed flag from one MSISDN to another MSISDN (same IMSI). If the IMSI is registered and the ModifyDisplayedMSISDN is executed, an ISD message with the NewMsIsdn will be sent. 214 910-6701-001 Revision A, June 2013