User Interfaces Release 9.1 Subscriber Provisioning Reference Manual The Update request should follow the format as shown below: Note: Using the one line format in the XML file will simplify and speed up the bulk provisioning process. Update requests can also be provided on a single line in an XML file. Due to margin limits, the line is shown continuing onto subsequent lines, in the format as follows. AttributeName "/> AttributeName "/> For XML examples of an update request for the HLR, SIP and HSS, please refer to the "chapter 5" in the SDM Subscriber Provisioning – User Guide . Insert Request The Insert request allows the user to insert one entity at a time.
The Insert request type supports two formats. Short format Long format Short Request format In this format, the user specifies the entity name, the entity namespace, and the list of attributes and values required. This format has been designed to reduce the number of XML keywords. attribute value When a request is specified in the above format, it will be processed as an Insert request. Note: It is not possible to send an Insert Request in short format via the TCP/IP direct connection. Short format Insert Requests are only supported when provisioning using the Command File Loader tool. Long Request format This format follows the long format request.
The Insert request consists of the following parts: 34 910-6701-001 Revision A, June 2013