BAIC — Select Request

User Interfaces Release 9.1 Subscriber Provisioning Reference Manual request identification entity identification set of attributes and values The long format supports the capability to convert the insert request in an update request if the target entity already exists. In order to do so the odk="yes" keyword must be added besides the insert declaration. The Insert request in long format should follow the format as shown below: Note: Using the one line format in an XML file will simplify and speed up the bulk provisioning process. Insert requests can also be provided on a single line in an XML file, in the following format:

attribute value attribute value For XML examples of an insert request for the HLR, SIP and HSS, please refer to the "chapter 5" in the SDM Subscriber Provisioning – User Guide . Delete Request Delete requests are formulated with the following parts: request identification entity identification criteria The Delete request should follow the format as shown below: Note: Use the one line format in the XML file to simplify and speed up the bulk provisioning process. Delete requests can also be provided in an XML file on a single line. Due to margin limits, the line is shown continuing onto a second line as follows.

name="AttributeName"/> For XML examples of a delete request for the HLR, SIP and HSS, please refer to the "chapter 5" in the SDM Subscriber Provisioning – User Guide . Select Request Select requests are formulated with the following parts: 35 910-6701-001 Revision A, June 2013