BAIC — Operation Request

User Interfaces Release 9.1 Subscriber Provisioning Reference Manual request identification entity identification set of attributes and values criteria (also called "where") The Select request should follow the format shown below: Note: Using the one line format in the XML file will simplify and speed up the bulk provisioning process. Select requests can also be provided on a single line in an XML file. Due to margin limits, the line is shown continuing onto subsequent lines, shown below in a general format.

name=" AttributeName "/> name="AttributeName"/> "'value'"/> For XML examples of a select request for the HLR, SIP and HSS, please refer to the "chapter 5" in the SDM Subscriber Provisioning – User Guide . Operation Request Operation requests are formulated with the following parts: request identification operation and entity identification set of attributes and values The Operation request should follow the format shown below: Note: Using the one line format in the XML file will simplify and speed up the bulk provisioning process. Operation requests can also be provided on a single line in an XML file.

Due to margin limits, the single line is shown continuing onto subsequent lines, shown below in a general format. OperationName " ent=" EntityName " ns=" Namespace "/> 36 910-6701-001 Revision A, June 2013