DRIVING - Engine Operations transmission gear indicator when the PTO is engaged). 2. Press the Cruise Control (CC) ON/OFF switch to enable PTO speed control operations. A white speed control enabled icon will appear. 3. Optional: If your PTO has designated PTO presets located on the dash: If you have dash mounted PTO preset switches, toggle the desired PTO Preset switch, or Using the dash mounted PRESET Increment and Decrement switch, cycle through the PTO presets to select the desired preset. PTO Speed Control is now active. Vehicles with an MX engine will display a green PTO indicator with a target PTO engine speed. 4. Optional:
If you don't have dash mounted PTO preset switches, press the SET + and RES – buttons located on the steering wheel to command a desired engine speed. PTO Speed Control is now active. Vehicles with an MX engine will display a green PTO indicator with a target PTO engine speed. 5. To increase or decrease PTO engine speed use a combination of short and long presses of the SET + and RES - buttons located on the steering wheel (the cruise control buttons when the vehicle is moving). Vehicles powered with PACCAR MX Engines will display the PTO engine speed above the PTO indicator. operation is controlled by the engine computer. WARNING DO NOT work on or near the fan with the engine running.
Anyone near the engine fan when it turns on could be injured. If it is set at MANUAL, the fan will turn on any time the ignition key switch is turned to the ON position. In AUTO, it could engage suddenly with- out warning. Before turning on the igni- tion or switching from AUTO to MAN- UAL, be sure no workers are near the fan. Failure to comply may result in death or personal injury. 4 PTO Active Gauge CAUTION DO NOT operate the engine fan in the MANUAL position for extended peri- ods of time. The fan hub was designed for intermittent operation. Sustained operation will shorten the fan hub’s service life as well as reduce fuel economy.
Engine Fan Control The engine fan switch on the dash has a manual and an automatic mode. In the manual mode, the engine fan will engage until the switch is back into automatic mode. In automatic mode, the engine fan Y53-6126-1A1 (01/21) 139