DRIVING - Driver Assistance Adaptive Cruise Display The display area for Active Cruise will contain dynamic visuals related to whether a tracked vehicle is in front and the amount of following distance set for Active Cruise. It will show an outline of a car in the display area when the radar is tracking a vehicle. Once it locks on to a tracked vehicle, it will display horizontal bars to represent the amount of following distance from the tracked vehicle. Once it locks and tracks a target vehicle, the system will adjust the speed to accommodate the speed of the tracked vehicle in front of it.
Following Distance One Bar Following Distance Alerts The display will be white when the tracked vehicle in front is at a proper following distance. If the following distance decreases (less than 1.5 seconds), the following distance bars will turn amber. When the following distance decrease more (0.5 seconds), the following distance bars will turn red. Following Distance Five Bars Five bars represents a farther distance. 4 Object Detected Alert When Collision Mitigation instrumentation detects a roadway object not recognized as a vehicle, the following graphic will show in the Driver Assistance area of the Digital Display: No Tracked Vehicle See Set ACC Following Distance on page 146.
Set ACC Following Distance Follow these steps to adjust the following distance for Adaptive Cruise Control: 1. Press the Toggle until the following distance bars illuminate in the view. Adaptive Cruise - Object Detected The operator can set the amount of following distance from the tracked vehicle. There are five preset distances to choose from, represented by horizontal bars between the hood and the forward car. One bar represents the nearest following distance. If the vehicle has Predictive Cruise Control, you may have to press multiple times to cycle through the other settings for PCC. 2. Rotate the Toggle up or down to choose the amount of following distance. 3.
Push the Toggle again to set the following distance. Because ACC doesn't classify the forward object as a vehicle, Collision Mitigation braking will not occur (see Collision Mitigation); instead, this graphic is accompanied by an audible alert, allowing the operator to decide how to best respond to the detected object. 146 Y53-6126-1A1 (01/21)