DRIVING - Driver Assistance For more information on the characteristics of the Adaptive Cruise Control feature, please read the ADAS OEM Operator’s Manual specific for your vehicle. Mitigation will apply the service brakes and present the following warning in the Driver Assistance area of the display (see Minimized View with Driver Assistance) along with an audible warning: may result in death, personal injury, or property damage. WARNING Collision Mitigation BRAKE WARNING Driver Assistance features respond dif- ferently to specific road, weather, and traffic conditions.
The operator must read the ADAS operator’s manual as- sociated with this feature and under- stand how it responds to these specific conditions prior to driving the vehicle. Failure to do so may result in death, personal injury, or property damage. The driver must remain alert, react ap- propriately, and use safe driving practi- ces while using this Driver Assistance feature. Ultimate responsibility for safe operation of the vehicle remains with the driver at all times. Failure to do so may result in death, personal injury, or property damage. Additionally, this popup will appear instructing the operator to take control:
4 Collision Mitigation (also Automated Emergency Braking) will attempt to prevent or lessen the impact of a forward collision where Collision Mitigation has determined impact with a vehicle is likely. Although the Driver Assistance instrumentation can detect a non-vehicular, forward object, only a recognized vehicle can trigger Collision Mitigation. Unlike Adaptive Cruise Control (ACC), Collision Mitigation is always on (at speeds greater than 15mph) and does not depend on Cruise Control being active. When Collision Mitigation determines that a forward vehicular impact is likely, Collision Collision Mitigation should not be used to stop or slow the vehicle without operator intervention.
A Collision Mitigation braking event will temporarily disable both ACC and standard Cruise Control, requiring these features to be reactivated by the operator. Collision Mitigation will continue to slow the vehicle until the potential for a collision has been averted, whether the potential collision be the vehicle that triggered the braking event or another forward vehicle the system has determined may likely result in an impact. The operator can cancel the braking event by using either WARNING The driver must remain visually aware of the roadway and traffic and not rely solely on Drivers Assistance features to identify and respond to the variety of vehicles or objects sharing the road.
The driver must read the ADAS opera- tor’s manual associated with this fea- ture and understand its limitations prior to driving the vehicle. Failure to do so Y53-6126-1A1 (01/21) 147