PACCAR 567 — PCC Behavior

DRIVING - Driver Assistance the accelerator pedal or the service brake. This lets Collision Mitigation know that the triggering event has been acknowledged. To prevent abuse of this emergency feature, after three Collision Mitigation braking events, ACC and Collision Mitigation will be disabled until the next time the ignition switch is cycled. This is to prevent using Collision Mitigation irresponsibly or in a manner for which it was not intended. Please read the ADAS operator’s manual specific for your vehicle to become familiar with the limitations of Collision Mitigation (Automated Emergency Braking). NOTE traffic in front of the ACC equipped truck.

There are many other factors that may influence the overall fuel economy of your vehicle (i.e., head wind and slope terrain, etc.). PCC Behavior As the vehicle approaches the top of a hill, PCC will decrease the vehicle speed (up to 8%below the set speed) to prevent the vehicle from exceeding the set speed while traveling downhill. This will result in a smoother, more fuel efficient ride as the vehicle approaches the crest of the hill. Once over the crest, momentum takes over and the system allows a predetermined amount of speed over the set speed. PCC can also activate Neutral Coast (NC) mode.

NC mode disengages the vehicle's driveline, reducing fuel consumption while maintaining overall vehicle speed. Once the vehicle can no longer maintain speed while coasting, NC is deactivated and the driveline re-engages. If the driver has activated one of the vehicle's retarder systems (Engine, transmission, or driveline), the vehicle speed may increase until it reaches the cruise control set speed plus the retarder offset. For more information about engine retarders, see your vehicle Operator's Manual. Predictive Cruise Control operates similarly to standard cruise control.

With PCC, vehicle speed is maintained without holding down the accelerator and can be used at 19 mph (30 km/h) or more. PCC will also actively recalculate and change the target cruising speed for best fuel economy rather than maintaing a constant set speed. The range of the PCC target cruise speed is defined by an overshoot and undershoot speed values. These values are adjustable by the operator. 4 Predictive Cruise Control (Option) Predictive Cruise Control (PCC) uses satellite technology and GPS maps to look at upcoming roads to dynamically calculate optimal fuel-efficient speed over a given terrain. NOTE Adaptive Cruise Control (ACC) has the ability to override Eco cruise.

This is because ACC is designed to deceler- ate the vehicle to match the speed of 148 Y53-6126-1A1 (01/21)