DRIVING - Driver Assistance PCC Undershoot Follow these steps to adjust the undershoot value for Predictive Cruise Control: 1. Press the Toggle twice. operation of the vehicle remains with the driver at all times. Failure to do so may result in death, personal injury, or property damage. Failure to do so may result in death, personal injury, or property damage. Using a windshield-mounted, forward facing camera, the Lane Departure Warning (LDW) feature monitors the road for lane markings and alerts the driver when the vehicle departs its lane without the use of the turn signal. Lane departure warning is only active at speeds greater than 37 MPH (60 km/h).
+ WARNING The driver must remain visually aware of the roadway and traffic and not rely solely on Drivers Assistance features to identify and respond to the variety of vehicles or objects sharing the road. The driver must read the ADAS opera- tor’s manual associated with this fea- ture and understand its limitations prior to driving the vehicle. Failure to do so may result in death, personal injury, or property damage. 4 - The bottom value below the set speed will illuminate. 2. Rotate the Toggle up or down to set the value. 3. Push the Toggle again to confirm the value. If you want to set the Overshoot value, see Predictive Cruise Overshoot on page 72.
Lane Departure Warning (LDW) WARNING WARNING Driver Assistance features respond dif- ferently to specific road, weather, and traffic conditions. The operator must read the ADAS operator’s manual as- sociated with this feature and under- stand how it responds to these specific conditions prior to driving the vehicle. The driver must remain alert, react ap- propriately, and use safe driving practi- ces while using this Driver Assistance feature. Ultimate responsibility for safe LDW is not available when the system cannot accurately detect lane markings; therefore, the camera should be clear of potential obstructions for the LDW feature to operate properly. 150 Y53-6126-1A1 (01/21)