PACCAR 567 — Speed Limit Recognition

DRIVING - Driver Assistance Assistance area accompanied by an audible alert: which it was not intended. Please read the ADAS OEM operator’s manual specific for your vehicle for more information about Highway Departure Braking. WARNING Driver Assistance features respond dif- ferently to specific road, weather, and traffic conditions. The operator must read the ADAS operator’s manual as- sociated with this feature and under- stand how it responds to these specific conditions prior to driving the vehicle. Failure to do so may result in death, personal injury, or property damage.

Speed Limit Recognition Using the forward camera of your Driver Assistance instrumentation, your vehicle can read most North American speed limit signs. The detected, posted speed limit is presented on the display using a road sign located in the Driver Assistance area (see Minimized View with Driver Assistance): HDB works along with Lane Departure Warning (LDW). LDW can warn of a highway departure prior to the braking action taken during a HDB event (see Lane Departure Warning). The operator can acknowledge and cancel a Highway Departure Braking (HDB) event by Applying the service brake and braking more than that applied by HDB.

Pressing the accelerator pedal and pressing more than 90% of the pedal range. Activating the turn signal. Activating the hazards. Steering the vehicle back into the lane. To prevent abuse of this feature, after six Highway Departure Braking events, HDB will be disabled until the next time the ignition switch is cycled. This is to prevent using HDB irresponsibly or in a manner for 4 Highway Departure Braking (HDB) will slow the vehicle when the feature determines the vehicle has unintentionally left the roadway. HDB is only active at speeds above 37 mph (60 kph).

When the midpoint of the vehicle crosses the solid white, outside lane line (also called the Fog Line) without use of the turn signal or hazards, HDB presumes an unplanned road departure and applies the service brakes. HDB will not bring the vehicle to a stop on its own (however, see Collision Mitigation), but is capable of reducing vehicle speed by up to 30 mph (48 kph). The digital display will notify the operator of a Highway Departure Braking event with a popup and show this graphic in the Driver When vehicle speed exceeds the posted speed limit by 5 mph (8 kph) or more, the operator is notified using alternating red and blue “cop” lights, indicating above the sign on the display.

This is accompanied by an audible alert. Please read the ADAS OEM operator’s manual specific for your vehicle for more information about Speed Limit Recognition. 152 Y53-6126-1A1 (01/21)