MAINTENANCE - Engine Maintenance 10. Verify that there are no air leaks, start the engine and allow the air system to reach operating pressure. Activate the under hood air switch and verify that there are no air leaks. Disconnecting the air solenoid will allow the air filter housing to be removed to access the air filter. 5 7. Cover the air hose end and the fitting with tape or something lint- free to keep the hose free from debris. 8. To reinstall the air solenoid to the filter housing, tighten the 13 mm bolt to 70 lb-in. ± 5 (7.9 N·m ± 0.56) 9. To reinstall the air line to the solenoid, push the air hose into the fitting, then pull on the air hose to ensure that it is properly seated.
Air Filter Restriction Indicator (Option) An Air Filter Restriction Indicator may be installed on the air filter housing or air induction piping for access to clean, filtered air. As the filter plugs and restriction increases, a red indicator will appear in a window on the indicator. When red appears, the air filter should be replaced. The indicator can 6. Remove the single bolt (with a 13 mm wrench) that holds the solenoid to the filter housing. 270 Y53-6126-1A1 (01/21)