MAINTENANCE - Frame be reset by pressing the button at the end of the indicator. system, see "Noise and Emission Control" in your vehicle operator's manual. Please refer to the engine operator's manual for more details on how to maintain the emissions components in the exhaust system. Check for complete insertion of motor mount. Replace as necessary. New leg to mount flange head bolts should be torqued to 210-230 lb-ft (284-311 N·m). Engine Mounting Frame CAUTION DO NOT re-torque or reuse existing flange head bolts. These bolts are fac- tory set to the specified torque. If bolts are loose or damaged, they must be replaced with the new bolts. Failure to comply may result in property damage.
WARNING 5 DO NOT cut, splice or weld frame rails or drill through the top or bottom flang- es of the rails. These operations could affect frame rail strength leading to a failure resulting in an accident. Rail failures resulting from such modifica- tions are not warrantable. Failure to comply may result in property damage, personal injury, or death. Periodic Inspection: Inspect engine mounts every 60,000 miles (96,000 km). Check for the following: Inspect both mount and leg fasteners. Check for loose or broken bolts. Replace as necessary. Check mount and leg for fractures, breaks or deformation. Replace as necessary.
Exhaust System The exhaust system is part of the noise and emission control system. Periodically check the exhaust system for wear, exhaust leaks, and loose or missing parts. For details on how to maintain the emissions components in the exhaust Y53-6126-1A1 (01/21) 271