PACCAR 567 — Noise Control System - Maintenance Log

MAINTENANCE - Noise and Emission Control Check SCR canister filter, clamps and mounting brackets. Tighten if necessary. Inspect SCR canister for signs of rust or corrosion. Exhaust Piping Check exhaust piping for rust, corrosion, or damage. Replace deteriorated piping before holes appear. If piping is perforated at any point, temporary patching or lagging is acceptable until you can have permanent repairs made. On turbocharged engines, check joints at flanges and mounting brackets for tightness. Diesel Particulate Filter (DPF) Check DPF, clamps, and mounting brackets. Tighten if necessary. Inspect DPF for signs of rust or corrosion. Check internal baffling.

You can do this by listening for rattling sounds while tapping on the (DPF with a rubber mallet or revving the engine up and down through its normal operating range. DEF Tank (See Aftertreatment System manual) Exhaust Tail Pipe Engine Fan and Shroud Hood Insulation Blanket Inner Fenders Shields and Cab Skirts Noise Control System - Maintenance Log To ensure your vehicle's noise control requirements are maintained, record maintenance checks. Use the following log sheet and retain copies of documents regarding maintenance services performed and parts replaced on the vehicle. 5 Y53-6126-1A1 (01/21) 281 Component Recom- mended Interval (Miles) Date & R.O. No.

Repair Facility & Location Work Performed Date & R.O. No. Repair Facility & Location Work Performed Exhaust System Routing Integrity 25,000 Shutters Shrouds 25,000 Hood Insulation Blanket 10,000 Engine Mounted Hose Insulators Fasteners 10,000