PACCAR 567 — Manually Release the Parking Brake

EMERGENCY - How to Recover a Vehicle necessary because if the transmission is driven by the driveshaft (rear wheels on the ground), no lubricant will reach the gears and bearings, causing damage to the transmission. . See How to Manually Lock a Differential on page 53 6. Follow state/provincial and local laws that apply to vehicles in tow. 7. Do not tow vehicles at speeds in excess of 55 mph (90 km/h). For additional information concerning heavy duty truck recovery, refer to the following Technology & Maintenance Council (TMC) literature.

Recommended Practice #602–A — “Front Towing Devices For Trucks and Tractors” Recommended Practice #602–B — “Recovery Attachment Points For Trucks, Tractors, and Combination Vehicles" Recommended Practice #626 — “Heavy Duty Truck Towing Procedures” Copies of these can be obtained from the following address: Technology & Maintenance Council 950 N. Glebe Road (703) 838-1763 Arlington, VA 22203 Email: tmc@trucking.org Website: http:// tmc.truckline.com Manually Release the Parking Brake There may be times when there is not enough air pressure, or the engine's air compressor is not able to produce enough pressure, to release the parking brakes.

In such cases, the parking brakes (or Spring Brakes) can be manually released. 2 See How to Prepare the Axles for Towing on page 52 3. Connect the towing chain or cable using best recovery practices . WARNING See Best Practices for Recovery Rigging on page 55 4. Make sure the recovered vehicle's parking brakes are released. . DO NOT drive vehicle with malfunc- tioning brakes. If one of the brake cir- cuits becomes inoperative, braking distances will increase substantially and handling characteristics while braking will be affected. You could lose control of your vehicle or cause an ac- cident. Have it towed to the nearest dealer or qualified repair facility for re- pair.

Failure to comply may result in property damage, personal injury, or death. See Manually Release the Parking Brake on page 49 5. If you desire to use the recovered vehicle’s brakes, ensure that the vehicle’s air system is connected to that of the recovery vehicle. Ensure that any air line that has been removed from a driver-controlled main differential lock is firmly capped to prevent loss of air pressure from the recovery vehicle if it is supplying air pressure. If you don’t desire to use the recovered vehicle’s brakes, ensure that you cage the spring brakes before attempting to move the vehicle. Y53-6126-1A1 (01/21) 49