Komatsu — Full page photo print Komatsu

. MAINTENANCE MAINTENANCE PROCEDURE CHECK OIL LEVEL IN SWING MACHINERY CASE, ADD OIL WARNING Parts and oil are at high temperature immediately after the engine is may cause serious burns. Wait for the oil draining the oil. MACHINERY CASE (PAGE 4-64)". 4 - 49 stopped an temperature to go do wn before performing t his operation. Remove dipsti cloth. Fully insert dip 3. Pull out dipstic k (G) and check that the oil level i s between the (H) and (L) ma rks on the dipstick.

If the oil does not reach the (L) ma the cap of oil fi ller port (F) and add Remove dipsti ck (G) when adding o If the oil level drain valve (P) is above the (H) ma and drain the exces Set a contai ner to catch the oil un der drain va lve (P) before For the oil drai ning procedure, see IL IN SWING 6. After checking oil level or adding oil, insert the di pstick (G) into the hole and in stall oil filler (F) cap.