Komatsu — Full page photo print Komatsu

. MAINTENANCE MAINTENANCE PROCEDURE REMARK 4 - 56 19. After replacin g the filter cartridge, sta rt the engine and ru n it a t low idling for 10 minutes Check for lea kage of oil from the filter seal surface and tr anparent c ap mounting. If any oil is leaking, check the tightening of the filter cartridge. l oil leakage, repeat Ste If there is stil foreign mater ial in the packing surfac e is found, replace it with a ne w cartridge and repe at Steps 8 - 19 to install it. after operating feed pu mp (7) until its motion g ets hard.

The remaining air is naturally bled when the water separator is left as it is for so me time after the engine CHECK SWING PINION GREASE LEVEL, ADD GREASE Prepare a scale. P repare a scal 1. Remove bolts (1) (2 bolts) on the top o f the revolving fram e and remove cove r (2). 2. adjustment h ole (A). Check that the h eight of grease (S) in the area passing the pinion is at least 4 m m (0.158 in). Add gr ease if the level is Check if the necessary t Komatsu dist The total amo unt of grease: 10.5 liter 4. Install cover (