MAINTENANCE 24.10.2 CHANGE OIL IN HYDRAULIC TANK, REPLACE HYDRAULIC FILTER ELEMENT WARNING The oil is hot if the machine has just been operated. Wait for the oil to cool before changing it. To remove the oil filler cap turn it slowly to release the internal pressure, then remove it carefully. 1. Lower the bucket to the ground and apply the parking brake, then turn OFF the engine. 2. Remove bolt and remove cover. Cover design may vary, depending on the machine. 3. Remove the cap of the oil filler (F). 4. Set a container under drain plug (1) to catch the oil. 5. Remove drain plug (1). 6. Gradually open drain valve (2) to drain the oil. 7. After draining the oil.
close drain valve (2), then tighten drain plug (1). Tightening torque: Drain plug (1) to 68.6 ± 9.8 N m (50.6 ±7.2 lbf ft) Drain valve (2) to 63.7 ± 14.7 N m (47.0 ± 10.8 lbf ft) 3-68 WA420-3MC