Ch 6 page 30 ELECTRICAL SYSTEM Throttle pedal This is a throttle pedal assembly with a solid-state rotary position sensor that provides a dual linear output voltage proportional to absolute shaft rotation in either direction from a reference angle. It operates from +5V power typically supplied by a vehicle engine control unit (ECU). This device’s two outputs are independent and electrically isolated, supporting the implementation of highly fault tolerant and reliable systems. Figure 49 LCD Display Grayhill 3D70 7-inch display.
Figure 50 SHOP MANUAL Supply Voltage 5±0.5V Output Current 10 mA Operating Temperature -40°C to +85°C APS1,2 short circuit duration to ground 20 minute max APS1,2 short circuit duration to VCC 20 minute max Operating voltage 8VDC to 32VDC Power Consumption 7 W Standby Current USB 2.0 host CAN (2) CAN 2.0B Inputs (4) 0-32 VDC discrete digital; Freq Meas. to 20KHz, Pulse Width Meas down to 50uS Outputs (4) digital 200 mA switched high side Analog (2) 0-5V, 0-10V, 4-20mA, 0-5000 Ohm Operating temperature -30°C to +65°C