Komatsu — 24.6 EVERY 250 HOURS SERVICE

24. SERVICE PROCEDURE 24.6 EVERY 250 HOURS SERVICE WARNING Be sure to put a warning tag on work equipment control levers 1 . Maintenance for every 50 hours should be carried out at the same time. 24.6.1 CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE WARNING The oil is at high temperature after the engine has been oper- ated, so never change the oil immediately after finishing opera- tions. Wait for the oil to cool down before changing it. Prepare the following Container to catch drained oil: Min 54 ¬ capacity Refill capacity: 54 ¬ (14.26 US gal, 11.88 UK gal) Filter wrench 1. Open the engine side cover located on the right of machine. 2. Open oil filler F . 3.

Place a container to catch the oil under drain valve P . 4. Loosen drain valve P , and drain the oil. 5. Check the drained oil, and if there are excessive metal particles or foreign material, please contact your Komatsu distributor. 6. Install drain valve P . 7. Using the filter wrench, turn 2 filter cartridges 1 and bypass filter cartridge 2 to the counterclockwise to remove it. In particular, if this operation is carried out immediately after stopping the engine, a large amount of oil will come out, so wait for 10 minutes before starting the operation. 3-57