JCB — 111.pdf (p.111)

Section E - Hydraulics Hydraulic Rams Maintenance Specifications Maintenance Specifications In order to ensure long life of the hydraulic ram, carry out inspection and maintenance regularly. If an abnormal point is found, repair as soon as possible referring to the troubleshooting chart. Table 5. E-213 E-213 9803/9880-3 Inspection, Maintenance Point Inspection, Maintenance Contents Daily Monthly Annually Note Appearance Is the ram kept clean (especially the rod sliding part)? O Is there oil leakage from piping installation and fixing points? O Is there any peeling paint, separation or rust? O Operation Are the movements smooth and are there any abnormal sounds? O Is the response good?

O Is there oil leakage from the sliding parts? O Is there internal leakage? O Is the working pressure normal? O Is the set pressure for the overload relief valve normal? O Hydraulic Oil Is the hydraulic oil dirty or deteriorated? O Is the hydraulic oil replaced periodically? O Are the filters inspected periodically? O Installation with Main Body Is the pin greasing sufficient? O Is the pin greasing sufficient? O Is there backlash or wear in the pins? O Is the pin seal normal? O Are the installation screws loose or missing? O Tightening of the installation screws? O Piston Rod Are the sliding parts worn?

O When the rod sliding part is exposed for a long period of time apply anti-rust oil to the rod. Are there scratches or dents on the sliding parts? O Is there coating separation on the sliding parts? O Are the sliding parts bent? O Are there cracks in the welding or other damage? O