JCB — 37.pdf (p.37)

Section 3 - Maintenance Routine Maintenance Checking for Damage Checking for Damage Check the Machine Body and Structure Checking the FOPS Structure T3-063_5 Make sure that all guards and protective devices are in place, attached by their locking devices and free from damage. All excavators are designed so that an operator's protective structure can be fitted. In certain applications such as demolition, machines must be fitted with the optional Falling Objects Protection Structure (FOPS). It is the operator's responsibility to identify the risk of an application. Inspect all steelwork for damage. Pay particular attention to the following: Inspect all lifting point welds.

!M WARNING Inspect all pivot point welds. Inspect the condition of all pivot pins. You could be killed or seriously injured if you operate a machine with a damaged or missing ROPS/FOPS. If the Roll Over Protection Structure (ROPS)/Falling Objects Protection Structure (FOPS) has been in an accident, do not use the machine until the structure has been renewed. Modifications and repairs that are not approved by the manufacturer may be dangerous and will invalidate the ROPS/FOPS certification. Check pivot pins are correctly in place and secured by their locking devices. Check steps and handrails are undamaged and secure. Check for broken, cracked or crazed window glass and mirrors.

Replace damaged items. INT-2-1-9_6 Check all lamp lenses for damage. Check that all the FOPS mounting bolts are in place and undamaged. Check the FOPS mounting bolts for correct torque tightness. Check all attachment teeth are undamaged and secure. Check all safety and instructional labels are in place and undamaged. Fit new labels where necessary. Cab Mounted Note damaged paintwork for future repair. Check the Seat and Seat Belt T3-008_2 !M WARNING When a seat belt is fitted to your machine replace it with a new one if it is damaged, if the fabric is worn, or if the machine has been in an accident. Fit a new seat belt every three years.

2-3-1-7_1 Inspect the seat belt for signs of fraying and stretching. Check that the stitching is not loose or damaged. Check that the buckle assembly is undamaged and works correctly. Check that the belt mounting bolts are undamaged, correctly fitted and tightened. Fig 5. Check seats are undamaged and secure. Check seat adjustments for correct operation. 1 Torque tightness is 78.4 Nm (58 lbf ft) 3-32 3-32 9803/JSM-0412