JCB — 45.pdf (p.45)

Section 3 - Maintenance Routine Maintenance Electrical System Fuses Fuse Identification !M CAUTION Table 16. Fuses Always replace fuses with ones of correct ampere rating to avoid electrical system damage. 8-3-3-5 The electrical circuits are protected by fuses. The fuse box is located in the rear stowage area. Open the fuse box cover A to gain access to fuses. Fig 22. Machines Built Up To December 2011 A Fig 23. Machines Built After December 2011 If a fuse blows, find out why before fitting a new one. For fuse identification, label B is attached to the rear of cover A .

3-45 3-45 9803/JSM-0412 Fuse Circuit(s) Protected Rating 1 Controller Outputs 1-6 15A 2 Controller Outputs 7-12 15A 3 Controller Outputs 13-16 15A 4 Controller Outputs 17-22 10A 5 Controller Outputs 23-28 10A 6 Heater/Air Conditioner, Auto fan 20A 7 Wiper, Heated Seat 20A 8 Work Lamps, Opt Hyd, Radio (Ign), lighter 20A 9 Radio (Memory), Cab Interior Lamp Switch 10A 10 Key Switch 10A 11 ECU-STD, EMS Battery Supply 10A 12 Diagnostic 10A 13 Auxiliary 15A 14 ECU-STD, EMS, Fascia Ign Supply 5A 15 Re-fuelling Pump 15A 16 Engine Electric Lift Pump 10A C1 Engine ECM Battery Supply (Harness colour - WR/R) 25A C2 Main Fuse Box Battery Supply (Harness colour - WB/W) 25A C3 Ignition Supply (Harness colour - W/R) 60A