JCB — 53.pdf (p.53)

Section 3 - Maintenance Routine Maintenance Fuel System Changing the Primary Filter/Sedimenter Element Changing the Fuel Feed Pump Filter 1 Park the machine on firm and level ground. Stop the engine and remove the key. 1 Park the machine on firm and level ground. Stop the engine and remove the key. 2 Locate filter/sedimenter A . 2 Locate fuel feed pump A . 3 Drain and remove the water separator bowl. 4 To remove the filter element, release locking ring D and discard element. 5 Fit new element and secure in position with locking ring D . 6 Refit water separator bowl. A C D B Fig 52. 3 Rotate cover B counter clockwise and remove. 4 Remove magnet D and wash with clean fuel.

5 Remove filter element C . 6 Replace magnet and fit new filter element. 7 Fit cover B and rotate clockwise to secure. 8 Remove any spilt fuel. 3-76 3-76 9803/JSM-0412