honda — BF75A/BF90A

6. BF75NBF90A POWER TRlMlTlLT FOOT SWITCH When mounting a tiller handle type outboard, an optional power trimhilt foot switch can be installed. It will be necessary to perform wiring connections. Connect the terminals and terminal covers to the wire harness that comes from the power trim/tilt foot switch. Be sure to use water resistant terminal covers. If terminals are added, always use a wire crimper and securely stake terminals to wires. Remove the tiller handle bracket cover, connect the power trim/tilt foot switch wire harness, and secure it with the harness band and clips. POWER TRlMITlLT FOOT SWITCH POWER TRIM/ \ 4. To METER HARNESS A - TILT SWITCH / DESCRIPTION PART NO.

Foot Trim Switch 061 80-ZV5-000AH BI BLACK Br BROWN Y YELLOW 0 ORANGE LIGHTBLUE Bu BLUE Lb G GREEN Lg LIGHT GREEN . . . . . . . . . . . . . R RED P PINK To ENGINE WIRE HARNESS W WHITE Gr GRAY SI SLATE Pu PURPLE FOOT SWITCH HARNESS and METER HARNESS A Make a U-shape turn as shown. HARNESS BAND After connecting the connectors, clamp them using the harness band as shown. Date of Issue: June 2003 0 2001-2003 American Honda Motor Co., Inc. 611 0