honda — BF75A/BF90A

6. BF75NBF9OA 6. Throttle cable connection: Apply marine grease to the throttle cable pivot shaft. Rotate the throttle cam until marks line up with roller. The mark on the shift link bracket will be aligned with the mark on the shift link. THROTTLE CAM 8. Grease pivot shaft with marine grease. Fkl (marine grease) & , PIVOT SHAFT LOCK NUT 0 . Adjust pivot shaft until it will insert into shift link. Preload shift cable by turning pivot shaft one turn away from lock nut. Be sure pivot shaft, washers and lock pin are installed as shown. After attaching shift cable to shift link, check for smooth operation by moving remote control or gear shift lever to forward and reverse positions.

Make sure shift link moves smoothly and returns to the neutral detent position when the remote control or gear shift lever is returned to neutral. I NOTICE I Adjust pivot shaft until it will easily attach to the throttle arm top hole. Install pivot shaft from the engine side. Be sure pivot shaft, washers and lock pin are installed as shown. After connecting pivot shaft, go back and make sure marks still line up with roller. If marks do not bisect roller, readjust pivot shaft. SHIFTLEVER A If it is hard to shift, turn propeller shaft. Shifting with force will damage shift mechanism. If shift arm moves smoothly and neutral detent aligns, tighten cable lock nut and proceed. 7.

Shift cable connection: Make sure the shift lever is in the neutral position. Date of Issue: June 2003 0 2001-2003 American Honda Motor Co.. Inc. 611 2