honda — BF115A/BF130A

7. BFI 15AIBF130A SHIFT CABLE CONNECTION 1. Center remote control lever: a. Move remote control lever to full forward position. b. Slowly return control lever to the NEUTRAL position. c. Move control lever to full REVERSE position. d. Slowly return control lever to the NEUTRAL position. NEUTRAL SWITCH DETENT ROLLER I I - \ \ II SHIFT ARM e 3. Thread the pivot shaft onto the threaded portion of the shift cable. Apply marine grease to the pivot pin. Adjust the pivot shaft until it will insert into the shift link. Make sure the pivot shaft is centered in the shift link hole. Adjust by turning the pivot shaft, if necessary. Install washers on both sides of the arm and secure with the lock pin.

After attaching shift cable to shift link, check for smooth operation by moving remote control lever to forward and reverse positions. Make sure shift link moves smoothly and returns to the neutral detent position when the remote control lever is returned to neutral. I NOTICE 1 2. With the outboard motor in the neutral position, make sure the shift arm tip aligns with the neutral switch tip and the detent roller is in the shift arm groove. 4. 5. SHIFT LINK If remote control lever is hard to shifi, turn propeller shafi. Shfiing with force will damage shift mechanism. If shift arm moves smoothly and neutral detent aligns, tighten cable lock nut. 6.

Operate control lever to check for smooth, proper shift cable and throttle cable operation. The "V" mark on the shift link bracket will be aligned with the " A mark on the shift link. Date of Issue: June 2003 0 2001-2003 American Honda Motor Co., Inc. 7-1 2