honda — Gauges

9. GAUGES BLACK REDWHITE GENERAL INFORMATION 1. Wires of the same color are connected together. When wires of differing colors are connected, a color tube of the same color is attached near the connector. When couplers are used, those of the same color are connected together. When two-color wires are used, the main base color is noted first, and the subordinate marking color last. WHITE BLUE WATERPROOF COUPLER 2. When using a circuit tester to measure the voltage or resistance between terminals, touch the tester probe to the rear of the terminal coupler.

When a waterproof coupler makes it impossible to insert the probe and touch the terminal from the rear, insert the probe from the front, but take great care to avoid expanding the gap of the terminal contacts. 3. Before beginning any work, be sure to disconnect the negative (-) battery terminal first. 4. Following completion of work procedures, recheck all connections, screws and bolts for tightness and clearances. 5. When the battery is being installed or reconnected, the positive (+) terminal should be connected first. 6. After reconnecting the battery terminals, apply fresh dielectric grease to their surfaces. 7.

Following the completion of work procedures, be sure to securely reconnect any terminal covers which have been removed. Date of Issue: June 2003 0 2001-2003 American Honda Motor Co., Inc. 914