9. GAUGES 17. Before reconnecting wire connectors, check them to make sure the covers are not torn or broken, and the gaps of female terminals are not overly expanded or loose. CORRECT INCORRECT 18. Do not break the coverings of wire harnesses. If the covering of a wire harness is broken, either repair it with electrician’s tape or replace it. OK REPAIR OR REPLACE 19. Connect wire fixing bands securely to frames in their designated locations. When aluminum bands are used, be sure they are placed so their wires are held under the bands’ coated (insulated) surfaces only. CORRECT INCORRECT 20. Attach clamps securely to ensure their wire harnesses do not come loose. CORRECT INCORRECT 21.
Do not squeeze wires against the weld or end of a clamp when a weld-on clamp is used. CORRECT INCORRECT 917 Date of Issue: June 2003 0 2001-2003 American Honda Motor Co., Inc.