9. GAUGES 22. Clamped wires or wire harnesses should not touch or rest on rotating or moving parts. CORRECT . . . . . . .... -- _. -xk).. INCORREC’I Do not touch! 23. Be sure all wires and wire harnesses are routed away from hot surfaces. -._ 24. Wires should not lay or rest on sharp body edges or parts. . . Wires should be routed clear of bolts and screw heads or ends. 25. If wire harnesses cannot be routed to avoid a sharp corner edge, protect that portion of the harness by applying a tube covering. Date of Issue: June 2003 0 2001-2003 American Honda Motor Co., Inc. 918